Virtual Booth

 INTRODUCTION: Shoes Dryer Machine is an electric shoe dryer machine that can dry wet, damp shoes, kill bacteria and eliminate musty shoe odors due to exposure to water or rain without damaging the original physical shoes. The materials for creating this Shoes Dryer Machine are 15mm thick plywood, a used toaster where the nichrome wire still works, a PC computer cooling fan, LED lights, Acrylic Sheet Panel, Electric Wire, 3-pin Plug, USB Port, hinges, locks and door handles, screws and woodworking equipment for cutting, installing and measuring plywood to create the Shoes Dryer Machine.  OBJECTIVE: To dry wet school shoes and overcome the problem of slow-drying shoes due to the valley and wet weather, especially during the rainy season. METHODOLOGY: Preparation begins by gluing several pieces of plywood using titebond glue. Apply glue to the plywood and stick them together and fix them using a Clamp tool. After 3 hours, open the clamp and cut the plywood according to the specified size. Drill holes and cut out certain parts on the plywood to be used as a place to install the PC computer cooling fan, LED lights, wire and a used toaster that is still lit with nichrome wire. Glue and connect the plywood into a box measuring 20 inches long, 18 inches wide and 16 inches high. Use screws and titebond glue to finish the box. Install all the PC computer cooling fans in all the parts that have been specified as in the project sketch. Cut the wood to be the main door of the machine. Cut the front of the door to install an A4-sized acrylic sheet on the door. Install the hinges, acrylic sheet, lock and door handle. Install the main door on the front. Install the socket and electrical port panel on the back of the Shoes Dryer Machine. Connect all the wires, 3-pin plugs and USB to the electrical panel socket on the back of the machine. Put the wet shoes into the machine. Close the front door latch. Turn on the main electrical plug switch and press the toaster switch, the nichrome wire will emit heat, all the PC Computer Cooling fans will rotate to bring heat to the entire area inside the machine. The LED

 light will turn on (can be turned off if necessary). The shoe drying process begins and the Shoes Dryer machine will dry the shoes. CONCLUSION: The Shoes Dryer machine is the best solution to overcome the problem of wet shoes due to exposure to water or rain, especially during cloudy weather and prolonged rainy seasons. With the cost value of preparing a cheap machine, this machine will be able to be owned by every family. No more problems with watery, wet and musty smelling shoes. The health and cleanliness of the feet will be maintained. Cleanliness and comfort are prioritized. Musty smell bacteria are eliminated

Key Word: shoe dryer for better health outcomes